ENER-J Smart — Frequently Asked Questions

Key features include a unique hexagonal combination design, stylish appearance, no flicker, no glare with a colour temperature of 6500K. It provides a daylight-like lighting experience and reproduces the true colour of objects better than other hexagonal garage lights. The tube is wider with a larger and brighter light-emitting surface providing a wider range of lighting. The LED shop lights installation is tighter and not easy to loosen. It also features a DIY design for splicing different shapes.

The total lumen output is 15,360 lm.

The total power consumption is 160W.

The colour temperature is 6500K.

There are 864 pcs of LED beads.

There are 24 pcs of LED tubes in a set.

The LED tube type is T5 LED Tube.

The beam angle is 120 degrees.

The estimated lifespan is 25,000 hours.

The light can be ceiling mounted with included mounting hardware. It can also be surface-mounted or suspended from the ceiling (suspension kit needs to be purchased separately). Each tube utilises quick connects to expedite assembly.

These lights are suitable for various commercial settings, including car showrooms, auto shops, mechanic shops, small warehouses, and professional workshops. They are ideal for excellent detailing due to their brightness and light distribution. They can be used for both vertical and horizontal surfaces and offer easy overhead task lighting.

The warranty period is 2 years.

The product size for the 24pcs/set is 440 × 23.6 × 38.1mm. The product width of a single tube is 23.6mm.

The net weight of a single tube is 70g.

The input voltage is 200–240V.

The material used is PC (Polycarbonate).

The hanging accessory SKU is ACC1083. You need 5 sets of ACC1083 to hang 1 × T303.

Key features include a unique hexagonal combination design and a stylish appearance. It offers no flicker and no glare with a colour temperature of 6500K. This design aims to bring a daylight-like lighting experience to your garage by reproducing the true colour of your car showroom or objects. The tube is wider providing a larger and brighter light-emitting surface.

The total lumen output is 60,000 lm.

The total power consumption is 600W.

There are 3,204 pcs of LED beads.

A set includes 69 pcs of LED tubes (440mm) plus 12 pcs of longer tubes (1175mm).

The light can be ceiling mounted with the included mounting hardware. It can also be surface-mounted or suspended from the ceiling for easy overhead task lighting. Each tube utilises quick connects to expedite assembly.

The CRI is 80Ra.

• ACC1084 — Hanging Accessories for T304
• ACC1082 — T5 tube (Length: 440mm)
• ACC1095 — T5 tube (Length: 1175mm)
• ACC1048 — Y Connectors
• ACC1049 — V Connectors
• ACC1050 — Connecting Cables
• ACC1099 — T Connectors
• ACC1097 — L Connectors
• ACC1098 — Straight Connectors

The hanging accessory SKU is ACC1083. You need 10 sets of ACC1083 to hang 1 × T304.

This light is ideal for hotels, offices, conference/meeting rooms, factories, commercial complexes, residential/institutional buildings, schools, colleges, universities, and hospitals. It can also be used in homes, libraries, malls, and laboratories.

Key features include a steady structure with attractive aesthetic appearance, high lumens per wattage for electricity savings, a flicker-free driver for visual comfort that avoids eye fatigue, a super long life of up to 30,000 hours, and a 3-year warranty making it maintenance-free.

Wattage: 40W. Luminous flux: 4,000 lumens (100 lm/W). Colour temperature: 4000K. CRI: >80. Beam angle: 120°. IP rating: IP20. Input voltage: 220–240V. LED type: 240pcs SMD2835 SANAN chips. Mode: Back-lit. Dimensions: 595 × 595 × 10mm. Housing: Aluminium with PC diffuser. Driver: Flicker-free, CE certified, PF>0.9, THD<20%. Energy rating: A+.

It can be installed in a 60×60 ceiling grid or be suspended from the ceiling with the help of a suspension kit (sold separately).

Try swapping the driver with another panel. If the panel works with a different driver, the original driver is faulty — look for a replacement driver.

Dimensions: 595 × 595 × 10mm. Wattage: 40W. Luminous flux: 4,000 lumens (100 lm/W). Colour temperature: 6000K. CRI: >80. Beam angle: 120°. IP: IP20. LED: 240pcs SMD2835 SANAN chips. Driver: Flicker-free, CE certified. Energy rating: A+. Lifespan: 30,000 hours. Warranty: 3 years.

No, the T166 has a flicker-free driver which provides great visual comfort and helps avoid eye fatigue.

It can be installed in a 60×60 ceiling grid or be suspended using a suspension kit (sold separately).

Try swapping the driver with another panel. If the panel works with a different driver, the original driver is faulty — look for a replacement driver.

Yes, it is CCT switchable between warm white (3,000–3,500K), neutral white (4,000–4,500K), and cool white (6,000–6,500K).

Dimensions: 595 × 595 × 10mm. Wattage: 40W. Luminous flux: 4,000 lumens (100 lm/W). CRI: >80. Beam angle: 120°. IP: IP20. LED: 240pcs SMD2835 SANAN chips. Driver: Flicker-free, PF>0.9, THD<20%, CE certified. Mode: Back-lit. Warranty: 3 years. Lifespan: 30,000 hours.

It can be installed in a 60×60 ceiling grid or suspended using a suspension kit (sold separately).

Try swapping the driver with another panel and check if it works. If so, the driver is faulty — look for a replacement.

Key features include cost effectiveness, high brightness, energy saving, and a unique innovative design of double squares that offers a very welcoming experience. Available in Daylight 6000K (T200), Neutral White 4000K (T200NW), and Daylight 6000K outer with Blue inner square (T200BL).

The T200 series supports recessed installation, surface mounted installation, and suspension installation. It is designed to easily replace standard LED 600 × 600 panel lights and can fit existing ceiling grids of 600 × 600mm or 595 × 595mm.

Wattage: 40W. Lumen output: 4,000 lm. CRI: Ra>80. Power factor: PF>0.9. Input voltage: AC 220–240V. LED: 504pcs SMD2835. Driver: CE & EMC certified. Warranty: 3 years.

Yes, an Emergency Battery Pack and Hanging Kits are available as add-ons.

Try swapping the driver with another panel. If the panel works, the original driver is faulty — look for a replacement.

The T300 LED Frame Panel is a unique and innovative Checks Borderline Panel design that replaces standard LED 60 × 60 panel lights. It sits around the edge of the ceiling tile by placing the checks grid tile back on top.

Wattage: 40W. LED colour: 6000K. Input voltage: AC 220–240V. PF: >0.9. Number of beads: 456pcs. LED type: SMD2835. CRI: Ra>80. Lumen: 100±5% lm/W. Warranty: 3 years.

• This product should be installed or maintained by trained electricians.
• Cut off the power supply before installation, replacement, or removal.
• Maintain a distance of more than 20cm between the fixture and any flammable materials.
• Ensure the distance between the upper part of the fixture and the ceiling is not less than 2cm.
• Do not install into ceilings or walls containing heat-insulating material.
• Read the manual carefully and wire correctly.

Key features include a modern PD design with a sleek double-layer appearance, bright and efficient 4,000 lumens output at 40W, cool white 6500K light, long-lasting performance up to 30,000 hours, and easy installation.

Lamp size: 591 × 591 × 11mm. Cut size: 575 × 575mm. Voltage: 220–240V. CRI: Ra>80. LEDs: 480pcs 2835 type. Diffuser: PC. Driver: LIFUD ES 1000mA. PF: >0.9. Beam angle: 120°. IP: IP20. Certifications: TUV, CE, EMC, LVD, RoHS. Warranty: 2 years.

Features include a hexagon-in-frame design for a contemporary look, 4,000 lumens at 40W, cool white 6500K, 30,000-hour lifespan, glossy finish, robust aluminium white frame, and a 2-year warranty.

Lamp size: 591 × 591 × 11mm. Cut size: 575 × 575mm. LEDs: 492pcs 2835 type. Driver: LIFUD ES 1000mA. Certifications: TUV, CE, EMC, LVD, RoHS.

The blue arrow design adds style and function by directing flow and creating ambiance. It is suitable for retail shops, gyms, corridors, hospitals, and schools where directional guidance and visual appeal are essential.

Lamp size: 591 × 591 × 11mm. Cut size: 575 × 575mm. Power: 40W. Lumens: 4,000 lm. Colour temp: 6500K. LEDs: 472pcs 2835 type. Driver: LIFUD ES 1000mA. PF: >0.9. IP: IP20. Certifications: TUV, CE, EMC, LVD, RoHS. Warranty: 2 years.

It is a 40W ceiling light that offers both RGB colour changing and adjustable colour temperature (CCT). It can be controlled using a remote, the ENERJSMART app (2.4G WiFi only), or through voice commands with Alexa, Google Home, Siri, and Apple Watch.

Yes, you can change the RGB colour to suit your mood, and you can also adjust the CCT to create the perfect lighting ambiance.

Yes, you can group control multiple units, allowing you to synchronise and manage lighting in different areas.

Wattage: 40W. Voltage: 170–245V AC. Dimmable: Yes. Lumens: 4,000 lm at 6000K. WiFi: 2.4G only (not compatible with 5G). Dimensions: 600 × 600 × 30mm. Weight: 2.5kg. Warranty: 2 years.

Whenever the panel is switched off from the mains or disconnected from the WiFi network, it will show offline. Try switching the power off for 10 seconds then back on to force it to reconnect. If that doesn't work, delete the panel from the app and add it again.

Yes, you can use the panel with the included remote only. You can pair up to 4 panels with one remote.

It is a 60×60cm LED panel with a 3D effect designed to create a realistic under-cloud ambiance. The panel gives the impression that the clouds are moving.

Wattage: 40W. Voltage: 170–245V. CCT range: 4000K–6000K. Total lumens: 3,600 lm (LED chips). Lumens per panel: 2,200 lm. Ra: 80. PF: 0.91. Beam angle: 120°. Size: 595 × 595mm (fits 600 × 600 ceiling grid). Certifications: CE-EMC, CE-LVD, RoHS. Warranty: 2 years.

Yes, the panel is dimmable and the colour temperature can be changed within a range of 4000K to 6000K using the included remote.

It takes a set of 4 units to make a large SKY image in a square.

Press and hold any of the group buttons (A/B/C) and then switch on the LED Panel. If the pairing is successful, the light on the LED Panel will blink. Alternatively, within 6 seconds of turning the panel ON, long-press the illumination button for 2 seconds. If successful, the light will flash three times.

Switch off the LED Panels. Then, long press the 'O' button and switch on the LED Panel. If unpairing is successful, the light will blink.

• ABC buttons — Select different groups of LED panels and turn those groups on or off
• I / O buttons — Switch all groups on (I) or off (O)
• CCT Switch — Cycle between 6500K, 4000K, and 3000K
• K+ / K− — Fine-tune CCT from 6500K (cooler) to 3000K (warmer)
• Brightness presets — 100%, 50%, 30%, plus increment/decrement buttons
• Small night light — Dim night light mode

It can be installed in a 60×60 ceiling grid, surface mounted with the help of a surface mounting kit (sold separately), or suspended from the ceiling with a suspension kit (sold separately).

Try swapping the driver with another panel. If the panel works with a different driver, the original driver is faulty — look for a replacement driver.

It is an ultra-thin LED panel that displays a crystal-clear 2D image of a sky with cherry blossom trees, offering a visually attractive alternative to standard dull white ceiling tiles.

Light that mimics natural light can lead to an improved mood, alleviation of anxiety and stress by creating a sense of the outdoors, and can catch the attention of visitors with a unique design. Ideal for retail, health, and care homes.

Yes, the standard cloud image can be swapped with a picture of your own or another of LED SKY's crystal-clear pictures.

Wattage: 40W. Voltage: 200–240V. CCT: 6000K. Lumens: 3,600 lm (LED chips). Ra: 80. PF: 0.9. Certifications: CE-EMC, CE-LVD, RoHS. SKU: E153(2D). EAN: 7141093838453. Warranty: 2 years. Takes 4 units for a large image.

Try swapping the driver with another panel. If the panel works, the driver is faulty — look for a replacement.

These are 60×60cm, 40W recessed LED panels designed to create a 3D sky imagery effect. They are sold in sets of four units to create a large sky image, simulating daylight using realistic high-resolution pictures.

Size: 60 × 60 × 11cm. Wattage: 40W. Voltage: 170–245V. CCT: 6000K. Lumens: 2,200 lm. Ra: 80. PF: 0.91. Drivers included. Certified: CE/RoHS/EMC. SKU: E800(3D). EAN: 70612518940871.

Suitable for domestic or commercial spaces such as places of education, healthcare sectors, waiting rooms, or sensory rooms. Particularly ideal for illuminating areas without natural light.

Try swapping the driver with another panel. If it works, the driver is faulty — look for a replacement.

An ultra-thin LED panel displaying a crystal-clear sky image. The standard cloud image can be swapped with your own picture. Wattage: 40W. Voltage: 170–245V. CCT: 6000K. Lumens: 2,200 lm. Ra: 80. PF: 0.9. Warranty: 2 years. Takes 4 units for a large image.

Try swapping the driver with another panel. If it works, the driver is faulty — look for a replacement.

40W per panel, 595 × 595 × 9mm, aluminium white flat frame, 200–240V AC 50/60 Hz, SMD 4014 LED chips, 6500K, 3,600 lm (chips only), EMC flicker-free driver, CRI >80, PF >0.9, 30,000-hour lifetime, 90% energy saving. Sold in sets of 4.

Try swapping the driver with another panel. If it works, the driver is faulty — look for a replacement.

These LED panels create mesmerising 2D Marine imagery, giving the impression of looking through a window at the deep ocean. They encourage a calm feeling and are suitable for education, healthcare, waiting rooms, and sensory rooms. Same specifications as E802 (40W, 6500K, 3,600 lm, 30,000 hours).

Try swapping the driver with another panel. If it works, the driver is faulty — look for a replacement.

Wattage: 24W. Non-dimmable. Luminous efficacy: 95 lm/W. CCT: 6500K. Beam angle: 120°. Input voltage: 165–265V. CRI: 80RA. Outer size: 300mm diameter. Housing colour: White. IP: IP20. Surface mounted. Driver included (non-isolated). Warranty: 2 years. EAN: 5061004713407.

A surface mounted round ceiling light that realistically simulates an Earth design for a unique aesthetic, combining light and shadow with natural art. 24W, 6500K, 120° beam angle, 300mm diameter, IP20, 2-year warranty. EAN: 50610047134211.

The E812 combines a natural SKY Light effect with Edge Lit border lighting for extra brightness. It features a PC cover + PS 2D SKY diffuser and aluminium frame. Output: 27–40V 1000mA. Input: AC 220–240V 50/60Hz. Power: 40W±2W. PF: >0.9. Lumens: 3,600 lm (without diffuser). CRI: Ra>80. CCT: 6000K. IP: IP20. Beam angle: 120°.

• Must be installed or maintained by trained electricians.
• Cut off power before installation, replacement, or removal.
• Distance between fixture and flammable materials must be >20cm.
• Distance between upper part of fixture and ceiling must be ≥2cm.
• Do not install in ceilings/walls with heat-insulating material.
• Never leave children unattended near fixtures.
• Avoid contact with open flames, external heat, or UV rays.

Try swapping the driver with another panel. If it works, the driver is faulty — look for a replacement.

Simple structure and low failure rate, no LGP so no yellowing concerns, wide PCB with SMD sources for super heat radiation, low light decay and long lifespan, PMMA optic lenses for high light transmission, up to 90% energy savings, instant start within 0.5 seconds, optional flicker-free operation, optional DALI/0-10V/PWM/RX/TRIAC dimming, eco-friendly, and lightning protection surge up to 1000V.

Dimensions: 1195 × 595 × 30mm. Input: 200–240V AC 50/60Hz. Max input/output power: 60W (±10%/±5%). Output current: 1200mA (±5%). PF: >0.9. THD: <20%. IP: IP40. Lifetime: >36,000 hours. Operating temperature: −20°C to +45°C. Operating humidity: 20–90% RH. Inrush current: <40A at 264V. Leakage current: <0.5mA. Complies with EN55015, EN61547, EN61000-3-2, EN61000-3-3.

It can be installed in a 120×60 ceiling grid, surface mounted (kit sold separately), or suspended (kit sold separately).

Try swapping the driver with another panel. If it works, the driver is faulty — look for a replacement.

A surface-mounted LED panel designed to create the illusion of a beautiful window view, featuring a 2D London Skyline design. Ideal for offices, meeting rooms, foyers, or waiting rooms. Comes in a set of 2 units.

Panel size: 600 × 1200 × 38mm (backlite surface). Power: 60W (2 drivers per panel). Lumens: 100 lm/W. Voltage: AC 220–240V. Flicker-free.

Each kit includes 2 panels, 4 drivers, 8 L-shaped brackets, 8 long screws, 8 short screws, and 8 plastic anchors. Note: an additional 50–60cm long 3-core cable is required but not included.

• Turn power off before installation or removal.
• For indoor use only.
• No excessive sunshine exposure to avoid material aging.
• Do NOT store or install in environments with high humidity, heat, strong magnets, heavy dust, or oil fumes.
• Do NOT disassemble — contact distributors or professional electricians.
• The panel is fragile — do NOT shake, bend, scratch, or squeeze.

Same form factor as E805 but features a 2D Grassland with window design. Creates the illusion of a beautiful outdoor view. Comes in a set of 2 units. Same specifications: 600 × 1200 × 38mm, 60W, 100 lm/W, AC 220–240V, flicker-free. Same kit contents and installation instructions as the E805.

A stylish 72W (36W × 2) contemporary light that can be installed on either the ceiling or wall. It features a dual-layer design, adjustable CCT (3000K / 4000K / 6000K), remote-controlled dimming, and up to 5,600 lm luminous flux.

Power: 72W (36W × 2). Input: AC 220V–240V. CCT: 3000K / 4000K / 6000K. Lumens: up to 5,600 lm. LEDs: 60× SMD2835. Materials: PMMA cover, iron backplate. Dimensions: Φ500mm × H100mm. IP: IP20. Includes remote control and mounting accessories.

Use the included remote. You can directly select 3000K or 6000K using the dedicated buttons, or rotate through 3000K, 4000K, and 6000K. There is also a night light mode.

Yes, all models feature an IP65 waterproof rating, making them suitable for outdoor use in all weather conditions. They can also be used indoors.

12W models: T484 (Warm White 3000K), T486 (RGB), T492 (CCT). Size: 60 × 8 × 4.5cm. 24W models: T485 (Warm White 3000K), T487 (RGB), T493 (CCT). Size: 100 × 8 × 4.5cm.

A remote is included only for RGB models (T486, T487) and CCT models (T492, T493, T495). It is IP65 rated.

Power on/off, speed control, 358 lighting modes, brightness control, remote ID matching, single cycle play, and the ability to adjust LED pixel point order and number.

CCT dimming (2700K–6500K), three-colour select (2700K / 4000K / 6500K), main light on/off, auxiliary light on/off, sleep mode (2W brightness), and 5%–100% brightness switch.

No, they do not retain the last set colour or Kelvin when switched off and on.

220–240V. All models have a matte black finish.

• E190: 50W, 600 lm, 5V/6W solar panel, 3.2V/5000mAh battery, 182×152×45mm
• E191: 100W, 1200 lm, 5V/10W solar panel, 3.2V/10000mAh battery, 225×188×45mm
• E192: 200W, 2200 lm, 5V/20W solar panel, 3.2V/20000mAh battery, 275×225×45mm
• E193: 300W, 3300 lm, 5V/30W solar panel, 3.2V/30000mAh battery, 332×272×46mm
• E194: 150W, 1800 lm, 5V/15W solar panel, 3.2V/15000mAh battery, 225×188×45mm

All models take 6–8 hours to charge fully under sufficient sunlight.

All models provide 10–12 hours of lighting on a full charge.

Install in a location that receives direct sunlight without obstructions, ideally facing south. Position at 15–30 degrees in winter and 30–45 degrees in summer relative to horizontal to maximise sunlight absorption. The cable between the floodlight and solar panel is 5M.

• ON/OFF: Turn light on or off instantly.
• DIM +/−: Adjust brightness.
• Timer (2H, 4H, 6H): Auto turn off after set period.
• Mode button: Cycles through 6 modes:
  • M1: High brightness 3 hours, then dim until dawn
  • M2: 50% brightness until dawn
  • M3: High brightness 4 hours, then off
  • M4: 80% brightness 2 hours, then off
  • M5: Charges by day, high brightness 5 hours + dim 5 hours
  • M6: Charges by day, 80% brightness 6 hours, then off

Keep the light off for more than 10 seconds. Press and hold the ON/OFF button on the remote for 3–5 seconds. The light will blink, indicating successful pairing.

1. Open the back cover screws with a screwdriver and remove the back cover.
2. Find the battery terminal and disconnect the battery holder.
3. Place the new battery and connect the terminal.
4. Put the back cover on and screw it back.

Yes, they have an IP65 rating, protecting against dust ingress and low-pressure water jets. Take precautions during heavy rain or extreme cold.

• E190: 50W, 1100 lm, 12W solar panel, 10Ah battery
• E191: 100W, 1700 lm, 18W solar panel, 15Ah battery
• E192: 200W, 2600 lm, 30W solar panel, 25Ah battery
• E193: 300W, 3000 lm, 35.5W solar panel, 30Ah battery

All use 5050 SMD 3W LED chips with lens design. Solar panels convert up to 19% of sunlight to electricity. IR remote with 20–30 feet range. IP65 rated.

Average 5–8 hours of continuous illumination on a full charge.

• ON/OFF: Instant on/off (cancels Auto mode; resumes next night)
• 100% / 50%: Brightness settings (default 100%, resets next night)
• AUTO: Restores default programme and cancels all settings
• 3H / 5H / 8H / 6H / 10H Timer: Light flashes to confirm setting
• M: Self-check to confirm remote is paired and operational

Within 30 seconds after the floodlight is powered on, press and hold the group key on the remote for 5 seconds. The floodlight will flash 3 times to confirm successful pairing.

When the device is powered on, long press the group key for 5 seconds. The device will flash 3 times to confirm the remote is released successfully.

• T476: Warm White 3000K, 10m, SMD2835, 600 lm, 6Ah battery
• T477: Warm White 3000K, 20m, SMD2835, 1200 lm, 12Ah battery
• T478: RGB, 10m, SMD5050, 200 lm, 6Ah battery
• T479: RGB, 20m, SMD5050, 400 lm, 12Ah battery

T476 & T478: 6V, 8W solar panel (235 × 350 × 17mm). T477 & T479: 6V, 12W solar panel (290 × 350 × 17mm).

Full charge: 4–6 hours. Working time on full charge: up to 12 hours of continuous lighting.

Yes, all models have an IP65 rating with a silicone housing, making them suitable for outdoor use in harsh weather conditions.

1 roll of Solar LED strip, 1 controller, 1 solar panel, 1 remote, and 1 bag of screws and battery. Warranty: 2 years.

No, these switches do not require a neutral wire at the switch location. However, they come with a capacitor in the box which needs to be connected between the live and neutral at the lighting end, as per the wiring diagram included.

The switch connects to your home's Wi-Fi network (2.4GHz only) and can be controlled via the ENERJSMART app, voice assistants (Alexa, Google Assistant, Siri), or the touch-sensitive glass panel on the switch itself.

No hub is required. They connect directly to your Wi-Fi network.

No, these are for non-dimmable lights only. For dimmable lights, use the SHA5299 Dimmable Switch.

Not in a traditional wired 2/3-way configuration. However, you can achieve 2-way functionality through the app's scene setting. Watch this tutorial video for details.

Maximum wattage is 200W per gang.

Minimum 45mm back box depth. The switch itself has a depth of 35mm.

Compatible with LED, incandescent, CFL, and halogen bulbs (non-dimmable). Maximum 200W per gang.

The switch itself does not require a neutral wire at the back of the switch. However, it comes with a capacitor that needs to go between the live and neutral at the lighting end as per the wiring diagram in the box.

1. Download ENERJSMART App from the App Store (iPhone) or Play Store (Android)
2. Login and register with your email or mobile phone number
3. Click on Add Device '+' on top right
4. Select 'Lighting - Light Source(Wifi)' for Smart lighting
5. Select your Wi-Fi network and enter password (must be 2.4GHz, not 5GHz — disable firewalls temporarily)
6. Put the device in pairing mode: hold one of the switch buttons for 5 seconds until it blinks
7. Click 'Ensure light is blinking rapidly'
8. Click Confirm and wait 1–3 minutes

If it fails, verify your Wi-Fi is set to 2.4GHz and no firewall is blocking the device.

They come with a capacitor in the box which needs to be connected to the circuit as per the diagram included.

No.

Yes, by adding wireless RF switches from the ECO range: WS1050X (1 gang), WS1051X (2 gang), or WS1052X (3 gang).

A device that replaces your standard light switch and allows you to control brightness wirelessly using a smartphone, tablet, or voice commands via Alexa or Google Assistant.

Yes, the WiFi dimmable switch requires a neutral wire.

Compatible with most dimmable bulbs: incandescent, halogen, dimmable LED, and dimmable CFL. Non-dimmable bulbs may not work correctly.

Yes, you can still control it manually using the physical switch, but app control is unavailable without internet.

ECO Range: Up to 20 metres indoors and 60 metres outdoors. More economical, recommended for in-house jobs with shorter distances.
PRO Range: Up to 30 metres indoors and 80 metres outdoors. Recommended for outdoor or garden jobs.

Through RF (radio frequency).

No, only 1, 2, and 6 circuit receivers are available.

No.

No, because HS1/WS1066 is from the ECO range and WS1017 is from the PRO range. Use the correct FOB (WS1036 for WS1017) or change the receiver to WS1055X.

Hold the pairing button for 3 seconds until the light turns red, then click the switch once. It should pair. (Exception: WS1057 old version — tap twice on the receiver then click the switch.)

Hold the pairing button on the receiver for 5 seconds, then click the switch.

Switch off the lights, then click to turn on and keep holding down the switch. The receiver will enter dimming mode after 5–7 seconds.

No, they are not compatible.

Switch off the 5GHz band on your router, then pair the receiver. Once paired, you can turn 5GHz back on.

It is possible but they may go out of sync if installed far apart. Consider using a 2-gang switch where one button turns all receivers on and the other turns them off.

Default is Trailing Edge. Hold the controller button for 20 seconds. If you see 5 blinks and release, it switches to Leading Edge. If you see 2 blinks and release, it's Trailing Edge.

Long press the "pair button" for 3 seconds until the controller slow blinks, then hold the kinetic switch for about 2 seconds. When the controller indicator goes off, dimming is turned off. To restore normal operation, hold the "pair button" until the flashes stop (about 10–12 seconds).

EZ Mode (ECO & PRO):

1. Download ENERJSMART App (App Store or Play Store)
2. Login/Register
3. Add Device '+' → 'Lighting - Light Source(Wifi)'
4. Select your 2.4GHz Wi-Fi and enter password
5. Hold the pairing button for 8 seconds until the light blinks fast
6. Click 'Ensure light is blinking rapidly'
7. Confirm and wait 1–3 minutes

AP Mode (PRO only):

1. Same steps as above, but in the app click EZ → select AP mode
2. Hold pairing button until it cycles from fast to slow blinking
3. Click 'Ensure light is blinking slowly'
4. Click 'Go to connect' and select SmartlifeXXX from Wi-Fi list

Bluetooth Mode (ECO only):

1. Ensure Bluetooth is on
2. Hold pairing button 8 seconds for blue light flashing
3. Phone Bluetooth will pick up device — click Add
4. Enter Wi-Fi password (must be 2.4GHz)

Yes, you need to delete the devices from the app and pair them again as new since the new router has a different SSID and password.

A compact smart plug designed for UK outlets with WiFi connectivity, allowing you to control plugged-in devices remotely via a smartphone app or voice assistant (Alexa, Google Assistant). No hub required.

Any device with a standard UK BS plug within the plug's power rating, including lamps, fans, heaters, coffee makers, and other small appliances.

Yes, the app lets you group and organise multiple plugs for individual or simultaneous control.

It is compatible with most standard routers that support 2.4GHz band.

It is designed for UK BS plug outlets and is not compatible with other countries' outlets without an adapter.

1. Download ENERJSMART App (App Store or Play Store)
2. Login/Register
3. Click Add Device '+' → 'Lighting - Light Source(Wifi)'
4. Select your 2.4GHz Wi-Fi and enter password (disable firewalls temporarily)
5. Put the device in pairing mode (hold the pairing button for 5 seconds until blinking)
6. Click 'Ensure light is blinking rapidly' → Confirm → Wait 1–3 minutes

A smart device inserted between a power outlet and your device, allowing remote on/off control via the ENERJSMART app or voice assistants.

1,600 watts maximum. Do not exceed this limit.

Yes, as long as your phone has internet access and the switch is connected to your home WiFi.

Yes, you can set timers and automation routines in the app to turn devices on/off at specific times.

Yes, you can control each socket individually using the app or voice commands.

Yes, it is compatible with Amazon Alexa and Google Assistant.

No, this model does not support energy monitoring in the app.

This varies by model. Check the product specifications or packaging to see if surge protection is included.

1. Download ENERJSMART App
2. Login/Register → Add Device '+' → 'Lighting - Light Source(Wifi)'
3. Select 2.4GHz Wi-Fi and enter password
4. Put in pairing mode: switch it off and on 3 times in a row
5. Click 'Ensure light is blinking rapidly' → Confirm → Wait 1–3 minutes

The package includes the battery/wired doorbell, mounting bracket, screws, security allen wrench, USB cable with Type-C port, and wire cable.

Battery or wired power options, HD resolution, 2-way wireless audio, PIR motion detection, app & PC client support, alarm notifications, and weather resistance.

1. Attach the bracket to the wall with the provided screws
2. Hook the top of the doorbell onto the bracket
3. Tighten the security screw at the bottom with the allen wrench

Connect the provided USB Type-C cable to the charging port. Red light = charging, green = fully charged. Full charge takes about 10 hours at 5V 1.5A input.

Turn off power at the breaker. Connect the wires from your existing doorbell to the terminals on the back of the doorbell. The device supports AC 12V–24V and cannot work with DC power.

Power on the device, open the app, and follow instructions to add the device. Select your WiFi network (only 2.4GHz supported) and enter the password. You may need to scan a QR code with the doorbell camera.

Download the ENERJSMART or SmartLife app from the iOS App Store or Google Play Store. You can also scan the QR code in the manual.

Yes, the app includes a "Playback" function. Storage options may include cloud or local storage via SD card.

Yes, the app includes a "Share" function to grant other users access to the live feed and notifications.

Yes, you can use it manually and it also comes with a small remote control.

Three modes: Fan only, 1000W, and 2000W.

Check the toggle switch on the back of the heater — make sure it's turned on.

Press and hold the WiFi button on the screen for 3 seconds.

The heater has a built-in safety kill switch. If tilted or lifted off the ground, it will stop working. Ensure the heater is always kept on a hard, flat surface.

On a hard, flat surface. Ensure no flammable objects (curtains, etc.) are within at least 100cm. Keep away from walls or structures for proper air circulation.

Overheat protection, tip-over auto shut-off switch, and PTC ceramic heating technology for safe, efficient operation.

Yes, all models support WiFi + BLE. Bluetooth is only for fast/easy pairing — the camera operates through WiFi only.

No, the device won't be online without WiFi. However, if event recording on motion detection is set to on, it will still record events to the SD card without WiFi.

Yes, both motion detection recording and continuous recording work on the SD card for all these models. Motion detection recording lasts 1 minute per event. Note: Battery cameras (SHA5344) and battery doorbells (SHA5357) do not record events without WiFi.

Most people use a fused spur inside the bathroom in an IP-rated box. Your electrician will be able to guide you on the correct installation for your setup.

The instructions manual includes diagrams explaining how to clean the filter once the product is installed.

It works with water pressure as low as 0.7 bar. The bidet has an inbuilt tank and pump used for flushing, so it does not rely heavily on water pressure.